![]() ![]() ![]() ![]() I began writing this with the intent to tell my readers that you need to plug it in to the internal and not use an external adapter. This worked like a champ and I'm about 46% finished cloning as I'm writing this. Unfortunately I didn't have any extra cables, so I had to unplug a secondary internal drive to be able to plug my 850 EVO in. Perplexed because it detected the drives fine, I began investigating.Īfter playing around with a few ideas, I had the thought that maybe it didn't like the fact that I was plugged into an external dock. ![]() " An error occurred while writing to the Target Disk" The Samsung Data Migration software happily detected both drives (although the software listed my 840 EVO as a "Generic- Compact Flash USB device"), but when I started the clone, after about 8 seconds, the software stopped with the following error: I connected the 850 EVO via a Thermaltake USB 3.0 dock. Today I was required to clone a Samsung 840 EVO SSD that has been intermittently failing ever-increasingly in the past couple of weeks. Read on below for more details if you need them. Make sure your source drive is Disk 1 and target is Disk 2 (whether that is forced via physical connections or configured in your BIOS) - please leave feedback if there is a better way to articulate this answer! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |